HomeOil Mist SeparatorOil Mist Separator OUF

Oil Mist Separator OUF

Used for oil mist pre-separation from processing machines, where cooling lubricants are used. Is mounted directly at the individual machine, so that oil mists do not reach the central piping system.
After oil mist pre-separation by OUF, the air should be filtered by a multistage oil mist filter, e.g. of the type OUK, so oil mist emission demands are met.

Air volume : Up to 2,000m³/h
Vacuum: Up to 2,000Pa
Filtration efficiency: Normally up to 85%

Oil Mist Separator Description

• Process air max. +35°C is led in through tangential inlet connection, which contributes to cyclone effect
• Air is filtered through washable pore filter
• Oil is collected in the bottom of the OUF, from where it can either be led back to the machine or drained off through mounted drain cock. Oil pan suspended in bayonet fitting.
• Filtered air is led out through the outlet connection in top to be connected to piping.

Easy connection and operation

OUF is easily mounted on the wall with 2 bolts through top fitting (4 possible positions) and connected to the piping on inlet and outlet connections. Separated oil can either be led back to the machine or tapped by drain cock in the oil pan. Filter is replaced (or washed) in suitable intervals. Filter is dismounted (without the use of tools) by loosening oil pan suspended in bayonet fitting.

Advantages by removing oil mist directly at the machine

• The hazardous effects on breathing and skin are reduced
• You minimize the risk of slippery floors (drip from piping) and consequential accidents
• Fire risk as well as the risk of oil mist aerosols damaging electronics in the machines are minimized
• Cleaning and maintenance costs are reduced, since oil deposits in piping and on surfaces are avoided
• Energy consumption is reduced (reduced air speed in ventilation channels, when there are no heavy oil particles that must be kept airborn, no oil mist deposits on light sources)

Oil Mist Separator Construction/surface

Filter cabinet is made in 1.5mm black steel plate
Surface powder enamelled RAL 7042/7011 structure

Oil mist separator OUF is used for the separation of oil mist from processing machines, where cooling lubricants are used. Can be placed on the wall with 2 bolts.

Is mounted directly at the individual machine so that the oil mist does not reach the piping system. Then a multi-step oil mist filter ist used, e.g. OUK, so emission demands for oil mist are met.

Oil mist separator OUF process
Oil mist separator OUF process

Oil Mist Separator Product Features

  • By removing the oil mists you avoid drip from piping
  • By removing oil mist you avoid slippery floors
  • Hazardous effects on breathing and skin are reduced
  • Less cleaning costs
  • Energy consumption is reduced
  • Separated oil can be recycled

Oil Mist Separator Further data

  • Oil mist separator OUF is available in 5 sizes with connection from ø80 – ø200mm.
  • Air volume up to 2,000m³/h
  • Vacuum up tol 2,000Pa
  • Filtration efficiency normally up to 85%.
  • The decentral oil mist separator OUF is easily mounted on the wall and connected to piping.
  • Separated oil can either be led back to the machine or drained by drain cock in the bottom.
  • The filter can be washed or replaced.

Advantages by removing the oil mist directly at the machine :

  • The hazardous effects on breathing and skin are reduced
  • Less risk of slippery floors (drip from piping) and consequential accidents
  • Fire risk as well as the risk of oil mist aerosols damaging electronics in the machines are minimized
  • Cleaning and maintenance costs are reduced, since oil deposits in piping and on surfaces are avoided
  • Energy consumption is reduced (reduced air speed in ventilation channels, when there are no heavy oil particles that must be kept airborn, no oil mist deposits on light sources)

Filter cabinet is made in 1.5mm black steel and subsequently powder enamelled.

Oil Mist Separator Type

Type Order no. Connection Inlet/outlet [mm] ∆P
start/end 1)
[Pa]
Max. capacity [m³/h]
OUF  80 –2) 4.321.000 ø80 500/800 300
OUF  100-3) 04 322 000 ø100 500/800 500
OUF 125-4) 4.323.000 ø125 500/800 800
OUF  160-5) 04 324 000 ø160 500/800 1200
OUF 200-6) 4.325.000 ø200 500/800 2000

1) Pressure drop stated over filter
2) Pore filter 35 for OUF 80, 370x160mm (08 135 500)
3) Pore filter 35 for OUF 100, 450x210mm (08 135 600)
4) Pore filter 35 for OUF 125, 530x280mm (08 135 700)
5) Poref ilter 35 for OUF 160, 640x390mm (08 135 800)
6) Pore filter 35 for OUF 200, 755x505mm (08 135 900)

Oil mist separator OUF dimensions
Oil mist separator OUF dimensions

Oil Mist Separator Dimension

Type Order no. A B C D E
OUF  80 4.321.000 ø80 ø265 354 90 35
OUF  100 04 322 000 ø100 ø315 403 98 34
OUF 125 4.323.000 ø125 ø412 478 113 34
OUF  160 04 324 000 ø160 ø514 583 128 33
OUF 200 4.325.000 ø200 ø611 689 147 35
RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

- Advertisment -
Google search engine

Most Popular

Recent Comments