The EXS Oil in Water Analyser is a sidestream oil in water analyser that provides unmatched reliability and accuracy to a wide range of applications such as produced water monitoring in the upstream Oil and Gas Industry, and effluent monitoring in the Manufacturing & Chemical Processing industry.
The RapidWave Ultrasonic Cleaning and Laser Induced Fluorescence, combined with the small footprint and robust design make it an ideal solution for applications where long periods between service/maintenance intervals are a necessity. The flexibility afforded by our advanced technology means that sample conditioning is not required, a basic sample transport system (inlet and outlet tubing) is sufficient.
GOOD DESIGN IS OBVIOUS, GREAT DESIGN IS TRANSPARENT
Technical Specification :
| OPERATING CONDITIONS : | |
| Ambient Temperature | : Ambient Temperature -20C to 60C |
| Process Temperature | : -20C to 200C |
| Design Pressure | : 100barg (higher options available) |
| Standard Operating Pressure | : 0 – 10barg (higher options available) |
| Flow Velocity | : 0.5 – 10 m/s |
| MECHANICAL : | |
| Dimensions | : W268mm x H353mm x D177mm |
| Weight | : < 25kg |
| Process Connections | : 3/4” NPT |
| Wetted Parts | : 316L SS Standard (others available) |
| Non-Wetted Parts | : 316L SS |
| Enclosure / Probe | : IP66 / IPW 66 |
| MEASUREMENT : | |
| Light Source | : Solid State CW 5mW Laser or Deep UV LED |
| Measurement Method | : Fluorescence Spectrometry[2] |
| Range | : PPB – 10,000 ppm* |
| Range (Deep UV) | : PPB – 50,000ppm* |
| Accuracy | : +/- 1% |
| Sample Rate | : < 1 sec |
| Repeatability | : < +/- 1% |
| CONTROLLER INTERFACE : | |
| Analogue | : 4-20mA, HART, Modbus TCP/IP |
| Ethernet | : 10 Mbps |
| Wifi | |
| Digital | : 2 x Volt free contacts |
| ELECTRICAL : | |
| Standard Power Voltage/Current | : 24VDC / 6A (230/110 VAC 50/60Hz option available) |
| Power Consumption | : DC 20W nominal, 140W peak. |
| : AC 15W nominal, 84W peak | |
| Cable Entries | : 2 entries – M20x1.5mm |
| COMPLIANCE : | |
| Directives | : • 2014/68/EU Pressure Equipment Directive, module A1 |
| : • 2014/34/EU ATEX Directive Exd IIG Class 1 Division 1, Zone 1 | |
| Standards : | |
| FM3600 | : Electric Equipment for use in Hazardous Locations General requirements |
| FM3615 | : Explosion Proof Electrical Equipment General Requirements |
| FM3810 | : Electrical Equipment For Measurement, Control and Laboratory Use |
| ANSI/IEC 60529 | : Degrees of Protection Provided By Enclosures (IP code) |
| CSA-C22.2 No. 30 | : Explosion Proof Enclosures For Use In Class 1 Hazardous Locations. |
| CSA-C22.2 No. 142 | : Process Control Equipment |
| CSA-C22.2 No. 60529 | : Degrees of Protection Provided By Enclosures |
| IECEx EN 60079-0 | : Explosive atmospheres Part 0: Equipment General Requirements |
| IECEx EN 60079-1 | : Explosive atmospheres Part 1: Equipment protected by flameproof enclosures “d” |
| IMO107(49) | : Marine 15 ppm regulations |
| DNVGL-CP-0485 | : Clean Design 5 ppm regulations |
The EXS Oil in Water Analyser from Inov8 Systems is an intelligent sidestream oil in water analyzer that sets new standards for reliability and accuracy in a variety of applications. It is specifically designed for demanding industries such as upstream Oil and Gas and Manufacturing & Chemical Processing, providing unmatched performance in monitoring produced water and effluents.
The EXS Oil in Water Analyser incorporates advanced technologies such as RapidWave Ultrasonic Cleaning and Laser Induced Fluorescence, ensuring precise and reliable measurements. Its compact design and robust construction make it an ideal solution for applications that require long periods between service and maintenance intervals. With its small footprint, the EXS Oil in Water Analyser can be easily installed and maintained, providing convenience and efficiency.
One of the key advantages of the EXS Oil in Water Analyser is its flexibility. Unlike traditional analyzers, it does not require extensive sample conditioning. A basic sample transport system with inlet and outlet tubing is sufficient, saving time and resources during installation and operation.
Drawing on decades of innovation experience in the Oil & Gas industry, Inov8 Systems has developed the EXS Oil in Water Analyser as the next generation of products to meet the evolving demands of the market. It offers a range of features to enhance performance and usability. These include the new rapid wave ultrasonic self-cleaning technology, a choice of standard or high-resolution spectrometry, and multiple communication options for improved management capabilities.
The EXS Oil in Water Analyser is designed to be user-friendly and convenient. It has low power DC voltage requirements, with additional options for AC power supply. The controller features a large user-configurable color display, making it easy to navigate and interpret data. With a weight of less than 25KG, it is lightweight and can be wall, rack, or stand-mounted, providing flexibility in installation options.
By using the EXS Oil in Water Analyser, users can enjoy several benefits. Its maintenance-free operation eliminates the need for regular maintenance, routine calibration, and added chemicals, resulting in a low cost of ownership. The interface is simple to use, allowing for easy setup and control. The controller meets hand carry requirements for choppers, enabling convenient transportation. Its minimal installation requirements, such as 24VDC power supply and Exd hazardous certifications (ATEX, IECEx, C1D1), ensure compliance and safety.
The EXS Oil in Water Analyser also offers remote monitoring capabilities and automatic process control, enabling continuous real-time measurements and proactive management of the system. This enhances operational efficiency and reduces the risk of non-compliance or process disruptions.
In summary, the EXS Oil in Water Analyser from Inov8 Systems is an intelligent sidestream oil in water analyzer that delivers unmatched reliability and accuracy. With its advanced features, compact design, and comprehensive benefits, it ensures precise and hassle-free monitoring, leading to improved process optimization, cost-effectiveness, and environmental compliance.
