Oil Bilge Separator Georim (15 PPM Bilge Separator) Application

As leading of Oily Bilge Separator(15PPM Bilge Separator) Manufacturer, GeoRim (GRS) has progressed in a professional manufacturer of Oily Bilge Separator, 15ppm Bilge Alarm, Bilge and Sludge Pump, and F.W.(or S.W.) Hydrophore Tank Unit.

Our new type Oily Bilge Separator has IMO type approval certificate and MED / EC type certificate and RS type approval certificate and ABS Classification Design Assessment Certificate in accordance with New IMO Resolution MEPC 107(49).

Our separators, produced based on our high technology and various experience in the field for 25 years, are being installed in ships of prominent shipping companies.

We have been making a constant effort with mind of environmental conservation and turning clean ocean over to the descendents. We are look over future, not only looking back our achievement in the past. We promise that we will the best company with customers based on the highest quality and technology.

15 PPM OIL BILGE SEPARATOR

TYPE : GRS-10EB, 20EB, 25EB, 50EB, 100EB

1. Tested According , IMO Resolution MEPC. 107(49).
2. Selfcleaing System with Automatic Backwashing

   

15 PPM Oil Bilge Separator Working Principle

Fig.1 SEPARATION OF OIL AND WATER

THE GRS-TYPE 15PPM Bilge Separator separates oil and water by difference of their specific gravity. The oily water is commenced to be separated when passing 4-way distributing device, and the floated and accumulated oil are collecting into the upper part of 1st chamber of the 1st vessel and also the remains including minute oil particles of oily water passes through the pallring & Urethane Coalescer equipped in the 2nd chamber of the 1st vessel.

During this process, the size of oily particle become great and floating speed of the particles are increased, thus the oil floats easily. As the emulsified oil is removed by Coalescer equipped in the 3rd chamber of the 1st vessel and 2nd vessel (Emulsion Treatment Unit) and then water is discharged under the condition of below 15PPM (or 5PPM) of oil density.

Fig.2  OIL DISCHARGE

When the collected oil in the upper part of the 1st chamber is detected by the Oil Level Detector, the oil discharging valve is opened and then oil is discharged automatically by the Backwashing system.

Fig. 3 BACKWASHING

[1st chamber of the 1st vessel] When the Oil Level Detector detects oil, the bilge pump is stopped and the oil discharge valve is opened and direction of 3-way Backwashing valve is changed for backwashing at the same time.

The coalescer filter in the 3rd chamber and Pallring & Urethane Coalescer in the 2nd chamber are cleaned by backwashing water automatically, and the floating objects with oil are discharged.

[2nd vessel(Emulsion Treatment Unit)] The emulsified oil is removed by the Coalescer and the equipment is cleaned by backwashing after opening the Air vent valve with manual Backwashing valve, thus the performance and efficiency of the system are improved.

Read more :

1. 15 PPM Bilge Alarm Georim GBA-155 Model
2. Georim GBA-155 15 PPM Bilge Alarm And Oil Water Separator