Facet’s Model MG glass fiber depth filter cartridges are for removing colloidal, slimy or sludge type solids 10 micron and larger or where compatibility problems exist with cellulose media.
Our pleated paper filter media is made from a variety of natural and synthetic fibers. The fibers are bonded using various resins to provide excellent filtration and solids holding characteristics.
The cartridges are 6″ (152 mm) OD, 3 ½” (89 mm) ID and 14 ½” (368 mm) long.
Glass Fiber Filter Cartridges Standard Design Features
• Maximum recommended operating temperature: 300ºF (148ºC)
• Maximum differential pressure: 75 psi (5.25 kg/cm²)
• Flow direction: Outside to in
• pH range from 1 to 9
Glass Fiber Filter Cartridges Materials
• All metal components coated to protect against corrosion on model MG10
• All metal components stainless steel on model MG10S
• Gaskets are CAF (non-asbestos)
• Metal outer wrap
Housing Selection
• Model 1MCM housings -non-code design for low flow rates
• SuperFlex™ AA housings -ASME Code design for high flow rates
• Model M housings -ASME Code design for high flow rates
• Model HF Housings
| Model | MG10 | MG10S | |||
| Micron | 10 | 10 | |||
| Viscosity | Flow | ∆P | Flow | ∆P | |
| ssu | cs | gpm | psi | gpm | psi |
| 29 | 1 | 75 | 0,45 | 75 | 0,45 |
| 32 | 2 | 75 | 1,0 | 75 | 1,0 |
| 36 | 3 | 75 | 1,4 | 75 | 1,4 |
| 43 | 5 | 68 | 2,0 | 75 | 2,0 |
| 52 | 8 | 42 | 2,0 | 42 | 2,0 |
| 58 | 10 | 34 | 2,0 | 34 | 2,0 |
| 98 | 20 | 17 | 2,0 | 17 | 2,0 |
| 140 | 30 | 11,3 | 2,0 | 11,3 | 2,0 |
| 190 | 40 | 8,5 | 2,0 | 8,5 | 2,0 |
| 230 | 50 | 6,8 | 2,0 | 6,8 | 2,0 |
| 342 | 75 | 4,5 | 2,0 | 4,5 | 2,0 |
| 455 | 100 | 3,4 | 2,0 | 3,4 | 2,0 |
| 910 | 200 | 1,7 | 2,0 | 1,7 | 2,0 |
| 1365 | 300 | 1,1 | 2,0 | 1,1 | 2,0 |
| 1818 | 400 | 0,85 | 2,0 | 0,85 | 2,0 |
| 2273 | 500 | 0,68 | 2,0 | 0,68 | 2,0 |
Read more :
