Eurosens LPS is designed to detect the presence of fuel residues in the discharge lines of the gasoline tanker. Installed behind the drain valve. Transmits fuel presence status “Yes/No” via RS485 interface (LLS protocol).
It can be used in conjunction with other Eurosens sensors to monitor gas tanker operation and deliver petroleum products.
The Eurosens LPS is a capacitive sensor designed as a spacer between the standard API flange of a gasoline tanker and the drain valve.
Fuel Level Sensor Specification :
| Power voltage, V | 9– 32 |
| Max current consumption (12V), mA | 40 |
| Temperature range, °C | -40 – +85 |
| Output interface | RS-485 |
| Putput protocols | LLS |
| Protection class | IP 67 |
Sensors supports LLS data protocol. Compatible with popular GPS tracking devices with RS485 interface.
Universal liquid level sensor Eurosens MWS to measure the distance to an object or product reflecting radio waves
The universal Eurosens MWS distance sensor is used to measure the distance to an object or product reflecting radio waves. Eurosens MWS uses microwaves princible and can measure distance through obtacles transparent for electromagnetic waves.
Typical Eurosens MWS application is liquid level measurement. If tank is made of steel we have to immerse the sensor transmitter into the tank. The Eurosens MWS mount is same with Eurosens Dominator fuel level sensors. We mount sensor using byonette plate.
For plastic tanks we can use outside mount without drilling the hole. Sensor could be attached using glue.
We can use Eurosens MWS for level measurement of bulk products.
Level Sensor Specification :
| Sensor model | Eurosens MWS | Eurosens MWS 2 |
| Power voltage, V | 10 – 50 | 10 – 50 |
| Reverse polarity protection | Yes | Yes |
| Range of measurement | 100-2000 mm | 100 – 10000 mm |
| Error of measurement | ±4mm (up to 1 meter distance), +-10mm (up to 2 meters distance) | ±4mm (up to 1 meter distance), +-10mm (up to 10 meters distance) |
| “Dead zone” near sensor | 60 mm | 60 mm |
| Temperature range, °C | -40 – +85 | -40 – +85 |
| Output interface | RS-485 | RS-485 |
| Putput protocols | LLS, Modbus | LLS, Modbus |
| Protection class | IP 67 | IP 67 |
Sensors supports universal MODBUS and LLS data protocols. Compatible with popular GPS tracking devices with RS485 interface.
Eurosens Dominator BT Fuel Level Sensor
Wireless IOT sensor
Wireless battery-powered fuel level sensor with Bluetooth BLE interface.
Wireless technologies are conquering GPS tracking and fleet management market. Eurosens Dominator is a capacitive Bluetooth fuel level sensor that has a significant advantage over other alternatives available – modular design.
Eurosens Dominator BT Fuel Level Sensor Key Benefits
- High-precision measurement;
- Bluetooth 4.2 BLE interface;
- Built-in temperature compensation;
- Modular design;
- Long life (5 years);
- Long range (up to 200 m).
Dominator fuel level sensors are designed to minimize the operation cost of fuel consumption monitoring system for its entire operation period. Eurosens Dominator BT advantages :
- Easy sensor sealing.
- Modular design allows to cut and extend the sensor for any tank size. Traditional non-modular sensors can’t be replaced once shortened.
- Modular design makes technical support easy and fast.
- Sensor head replacement takes less than 10 minutes due to bayonet mount. No need to recalibrate the tank.
- Dominator electrodes can be easily disassembled and cleaned .
- Wireless connection, no cabling required.
Fuel level sensor Dominator BT is used with data loggers and GPS tracking systems with BLE interface support. Compatible with all major GPS tracker manufacturers, for example
Eurosens Dominator Product Specification
| Battery life | 5 years |
| Bluetooth version | 4.2 BLE |
| Transmitter mode | Advertising |
| Range of wireless connection (direct sight) | 200 meters |
| Transmission power | +8 dBm |
| Max measurement error | 1% |
| Temperature range,°C | -40 – +85 |
| Protection class | IP 69 |
Fuel level sensor Dominator BT is used with data loggers and GPS tracking systems with BLE interface support. Compatible with all major GPS tracker manufacturers, for example
Read more :
