Capacitive fuel level sensor Eurosens Dominator is designed to optimize the time and place of fillings as well as prevent fuel thefts. The sensor provides stable and accurate data and easy maintenance. Eurosens Dominator sensors are compatible with the most fleet tracking systems and data acquisition hardware and software that makes them a universal solution for a fleet management projects. Why Eurosens Dominator?
- Easy to remove, reinstall and seal again due to bayonet mount;
- Easy troubleshooting and maintenance due to the modular design;
- Easy to extend.
- Easy to ship
- CE-certified
Some technical features :
- Variety of interfaces : RS485 and RS232 (Dominator RS), customizable analog and frequency outputs (Dominator AF), CAN J1939 interface (Dominator CAN), both AF and RS combined (Dominator 2), wireless battery-powered Bluetooth fuel level sensor (Dominator BT).
- K-line interface used to configure the sensors and ease the interaction between the devices.
- A discrete “alarm” output to alert about a fuel drain event (for Dominator RS/CAN).
- Customized versions with a built-in display, accelerometer, or for water measurement.
We care about the wishes of our partners!
|
|
Dominator Mini version with only 22-mm high head is designed to be installed in some restricted areas. |
External display for the sensor |
External display for the sensor can be also used as a calibration tool (for sensor installation without a laptop). |
|
|
Original mounting kit with a special gasket for the installation on a cylindrical tank and a bottom stop to reduce bending force. |
Eurosens Dominator
Accurate fuel level sensor compatible with almost any GPS tracker or SCADA system.
The Dominator Series Fuel Level Sensors Benefits
The Dominator series fuel level sensors are designed to minimize the operating costs of a fuel consumption monitoring system over its entire service life.
Advantages of eurosens Dominator : (for GPS tracking provider).
- Modular design allows to quickly create a sensor of the right length from the stock.
- Convenient sensor sealing against sensor extraction and cable disconnection.
- Modular design simplifies diagnostics and technical support.
- Universal protocols LLS/MODBUS/CAN J1939.
- The modular design simplifies diagnostics and technical support.
Advantages of fuel level sensors Dominator (for fleet owner):
- No need to unscrew the self-tapping screws fixing the mounting plate to the tank when removing the sensor for verification of the measuring instrument.
- The modular electrode design allows the sensor to be extended with a new electrode. When reinstalling old sensors to new equipment, it is enough to buy an electrode for extension, but not a new sensor.
- Replacement of the electronic module of the sensor does not require recalibration of the tank (we use previously calibrated electrodes).
- Dominator electrodes can be flushed from contamination without opening the case and violating the warranty. This does not require the involvement of the monitoring service provider (paid on-site visit).
Thus, it becomes possible to minimize the number of visits of the monitoring service provider for maintenance of fuel level sensors and, as a consequence, the cost of operation of the vehicle monitoring system.
The Dominator Series Fuel Level Sensors Specifications
| Power voltage, V | 10 – 50 (9-32 for Dominator RS 485) |
| Max measurement error, from sensor length | ±1% |
| Temperature range,°C | -40 – +85 |
| Output interfaces | Analog voltage(0-15 V), frequency (from 200 to 2000 Hz), RS-232, RS-485, CAN 2.0B, K-line |
| Service interface | RS-485 or ISO 9141 (K-Line) |
| Protection class | IP 67 |
Eurosens Dominator modifications are described below
| Х | Y | ||
| Output interface | Interface description | version index | Description |
| RS 485 | RS485 | Ex |
explosion-proof
|
| AF | analog output, power supply 0.5-15 V (customizable, limited by power supply) | ||
| frequency output, 200-2000 Hz (customizable) | |||
| K-line single-wire interface | |||
| RS | RS-485, RS-232 | Ext |
special version (custom length)
|
| frequency output, 200-2000 Hz (customizable) | |||
| K-line single-wire interface | |||
| CAN | CAN 2.0 interface | ||
| frequency output, 200-2000 Hz (customizable) | |||
| K-line single-wire interface | |||
| AFRS | RS232, RS485 | ||
| analog output, power supply 0.5-15 V (customizable, limited by power supply) | Mini – version with lower height of sensor enclosure.
We don’t use the “Mini” index with RS 485 and Bt modifications because they exist only in Mini version.
|
||
| frequency output, 200-2000 Hz (customizable) | |||
| K-line single-wire interface | |||
| RSCAN | RS485 | ||
| CAN | |||
| analog output, power supply 0.5-15 V (customizable, limited by power supply) | |||
| frequency output, 200-2000 Hz (customizable) | |||
| K-line single-wire interface | |||
| Bt | built-in battery and wireless interface Bluetooth Low Energy | ||
Read more :
